| | | | |
---|
| Author: | | Created: 13.01.2005 - Updated: 14.01.2005 | Stuff needed : Paper Glue
Tools needed : Scissors
Possible problems : Lack of manual skills
Difficulty : low, couple of hours
Story :
Can you remembere those days when, as a young boy, you loved those little paper models which you could cut out from different magazines? Whilest I was at making 110R model, I could not neglect other Škoda models. So now we meet at the 130RS.
The whole cutout is on two A4 size papers. I recommend to print it out, if possible, with a laser printer and on a harder type of paper. There is no ratio scale on the car, because every printer prints differently and more experienced and skilled modellers might want to print both pages on a one A4 paper and create a smaller model.
If you are going to print it on a normal paper, I recommend sticking it on a harder one and allowing it to dry out. Follow the numbers to start building. First cut out the roof and then gradually glue to it the sides and the front. Don´t forget to shape the sides out before you stick them on. Under the windows the sides bend forward at about 45° and then they connect with the curve of the door. I am sure you will do just fine :o)
) Take the front end first and glue it together. Then shape out the car´s front and glue it on. Shaping out the front isn´t the easiest, so try to imitate the original shape as much as you can. When you manage to put it all together, add rims, and if you wish, accessories (wipers, mirrors, registration numbers, lights...) - you don´t have to glue them on, everything is there already, except for the wipers and the mirrors. As the next thing, glue the wheel frame together. That´s where the wheels will go. The whole ensemble goes into the car´s body. After that, glue on the floor. The bumpers could be a bit tricky, but I believe that you will win. Axles are made with sticks. I recommend cutting out long thin strips of paper and with the help of the glue, winding them onto the sticks until they reach the wheel´s diameter. It will save you the work with sticking on the wheel, because then you can just stick the cutting onto the wrapped wheel and whack on the disc and the axle cap from the side.
Download here (402.7kb)
|
|
| | | | |
| Comments
| |
---|
| | | |
---|
|
| Tak jsem ho včera dodělal.Všechno vypadalo dobře než jsem začal pasovat podvozek.Nějak mi nevycházela zadní náprava a musel jsem posunout otvory dopředu do osy blatníků.Nevim jak se to stalo, ale je nízká jak lowrider ;o)
|
| | [ Vulgar ] [ Answer ]
| |
|
| | | | |
| | |
---|
|
| Díky za tento model,už jsem se také dal do lepení,vytïštěné to mám cca 1:24.Zatím mám hotovou kastli a zrovna teď jsem musel dát pauzu,protože u pasování a lepení lemů blatníků jsem se docela zapotil Jsem zvědavej jak se mi povedou kola,ty mam nejmíň oblíbené.Jinak tohle je můj druhý model,který snad dodělám,pač jako malej jsem vždy něco začal z ABC a nikdy nic nedodělal.1.model byl škoda 120l,taky v měřítku 1:24 a vypadá docela k světu
|
| | [ Vulgar ] [ Answer ]
| |
|
| | | | |
| | |
---|
|
| Díky za tuto možnost !! Na Aukru, ani jinde natož v kameném krámě se to sehnat momentálně nedá. Už jsem se obával, že nebudu mít co lepit........mohu se nějak revanšovat? pjontrs
|
| | [ Vulgar ] [ Answer ]
| |
|
| | | | |
|
| | | | |
| Copyright 2001-2015
| |
---|
| Materiál ze serveru daves.cz nesmí být publikován bez souhlasu autora. David Spilka (Daves), tel.: 775 328 374, email: send email, ICQ: 109318615
|
| | | | |
| Google search
| |
---|
| Could´t find what you were looking for? Try Google...
|
| | | | |
| | | Statistics
| |
---|
| Visiters: | 21 | Loged in: | 0 | Visits today: | 3252 | Total visits: | 27856223 |
| articles: | 179 | Photos: | 4065 | Comments: | 1233 | Users: | 310 |
|
| | | | |
|